topbanner ad

Friday 8 May 2015

Rivera Primo

New primary and lighting options from Rivera Primo

RIVERA Primo now has a belt drive available for use on ’07 and later Touring models. The Brute III Extreme 1-3 /4in enclosed belt replaces the stock chain drive, and in doing so removes 25lb of rotating mass. This reduction allows the engine to work more efficiently and release more horsepower. The change from chain to belt also reduces the number of regular service and maintenance jobs needed.



The 8mm thick belt used in the drive is made up from layers of Aramid fibers for increased strength.
The Brute III Extreme 2007 Touring comes standard with a Rivera Primo Pro clutch, which is a diaphragm clutch that uses one cupped piece of spring steel to put equal all around pressure on the pressure plate. This design is used instead of multiple coil springs that do not all have the same rate of collapse, resulting in uneven distribution of pressure. The diaphragm spring used by Rivera Primo is said to provide a mechanical advantage over coil springs and is easier to pull in, offering a lighter lever action. 



Alongside the launch of the new primary drive, Rivera Primo is also debuting new lighting options. The new RFB LED is an all LED headlight with high and low beams of 2400 Lumens. The LED light is held in a retro shaped lamp, which also houses LED marker/turn signals within the billet bezel.



RIVERA PRIMO
Whittier, California, USA
Tel: 562 907 2600
info1@riveraprimoinc.com
www.riveraprimoinc.com